• . satis@bluvent.net
  • .  90 (541) 445 50 03
  •  
  •  
Buradasınız :
Turbo Serisi
USE

Supply and exhaust ventilation systems installed in various premises. Mounting in kitchens, bathrooms and other humid premises. Ventilation air ducts requiring high pressure, powerful air flow and low noise level. Compatible with Ø 100 up to 315 mm round air ducts. 

DESIGN

Casing made of low-flammable polypropylene. Ventilation unit with terminal box. Can be turned to any position.Special casing design permits easy dismantling of the impeller and motor block for fan servicing without dismantling the air duct.

MOTOR

Double-speed single-phase motor on ball bearings. Equipped with thermal overload protection.

SPEED CONTROL 

The built-in switch (option US) or external switch for multi-speed fans (available upon separate order) are used to select one of two capacity modes. Smooth speed control is possible with a built-in speed controller (option FR), or an external thyristor speed controller (available upon separate order).

MODIFICATIONS AND OPTIONS

T – adjustable run-out timer regulated from 2 to 30 minutes.US – three-position speed switch integrated in the fan. FR – built-in smooth speed controller from 0 to 100 %. The fan is supplied with a pre-wired power cable with IEC plug as a standard. The cable modification with a standard electric plug is also available (FR1). 

G – smooth speed controller with an electronic thermostat and an external temperature sensor that is fixed on 4 m power cable. The fan is supplied with a pre-wired power cable with IEC plug as a standard. The cable modification with a standard electric plug is also available (G1). GI – smooth speed controller with an electronic thermostat and a temperature sensor integrated into the air duct. The fan is supplied with a pre-wired power cable with IEC plug as a standard. The cable modification with a standard electric plug is also available (GI1). 
The options G and GI are used for automatic speed control depending on indoor temperature. The best ventilation solution for premises requiring permanent temperature control as greenhouses, orangeries, etc. 
W – the fan is equipped with a pre-wired power cable and IEC plug as a standard. Modification with a standard electric plug is available (W1). max – high-powered motor.

MOUNTING

Due to compact design the fan is the ideal solution for mounting in limited spaces, including space behind a false ceiling. The fan can be installed in any section of the ventilation system from intake to the end of the ductworks. 

       

Wall or ceiling mounting with a mounting plate.
ТD – mounting kit for installation of one diameter fans in parallel (for boosting capacity)

TL – mounting kit for installation of one diameter fans in series (for boosting pressure).



Adalet Mah. 1594/1 Sk. No:1 D:28
Avcılar Office
Bayraklı - İZMİR
Gsm : +90(541)445 50 03
E-Posta : satis@bluvent.net

E-Bültene Abone Olun!
Yeniliklerden ilk siz haberdar olun!
Sizi Tanıyalaım!

E-Bültene Başarıyla Eklendiniz.

Copyright © 2017   •   BLUVENT   •   Tüm Hakları Saklıdır